450W 110V Electric Flexible Shaft Sheep Shears Goat Shearing Wool Clipper Tools

Description

450W 110V Electric Flexible Shaft Sheep Shears Goat Shearing Wool Clipper Tools
This sheep shears is 13 straight tooth blade suitable for cutting slim wool. Wool thickness is precisely controlled. According to the thickness of the wool, the cut wool can be quickly smoothed.
★ It is suitable for small-scale shearing of individual sheep farmers, and is also suitable for large-scale organization. Shearing, and also suitable for the trimming of raw and cooked fur and brush.
★ Labor-saving, the grip structure of the scissors is humanized, and the long-term shearing of the hand will not be fatigued.Easy to start, suitable for most of the new hairdressers.Cool temperature when long time operation, easily to reach animal,suitable for everyday clipping.
★ The blade has high hardness, good toughness, wear resistance and sharpness. The tip of the blade is finely manufactured, the combing property is good, it is not easy to hurt the sheep, and it can adapt to the shearing of different sheep species in different countries, different regions and different seasons.
★ The electric shearing machine has the characteristics of compact structure, beautiful appearance, light weight, small vibration, comfortable grip, flexible and reliable operation, simple maintenance and low noise. It can shears 8-10 sheeps in one hour and is suitable for family farming or pasture farming.
Parameters:
Weight: 2.5kg
Blade width: 80mm
Motor power: 450W
Size: 410x 80mm(L*W)
No load speed: 2400rpm
Rated voltage: 110V
Package included:
1 Set of Sheep shears(13 Straight tooth + English manual)
Instructions for Using:
Pressure regulation between moving blades:
1. Adjust the pressure of the moving blade to an appropriate value before use, that is, do not send it too tightly to avoid damage to the blade (subject to the flexibility and smoothness of the wool). The built-in pressure spring has a certain self-pressurizing function.
2. After use, the pressure of the moving and cooling blade is adjusted to the minimum (spinning pressure adjustment)
Note:
The gap time during the shearing process must be turned off manually; be sure to unplug the power after use.
Operation when replacing the blade:
1. Loosen the pressure of the blade first (unscrew the pressure adjustment cap)
2. Loosen the two screws that hold the stationary blade
3. Install the new blade but do not fasten it; then install the moving blade. Note that the static blade must expose the blade to about 1-1.5mm. At this time, in the fixing screw, of course, check the left and right swing amplitude of the moving blade to be symmetrical.
Lubrication and maintenance of electric wool shears:
1. Inject oil into the oil injection hole of the nose before and after use.
2. In the middle of the work before use and when it is used, it should be in the rotary pin seat in the moving blade/pressure rod seat, and the 32# lubricating oil around the roller (every half hour)
3. Bearing ball bearing, no need to refuel, self-lubricating bearings generally do not need to add oil, but add a little oil will make the bearing life longer
On May 16, 2022 at 21:01:19 PDT, seller added the following information: